ZyXEL Communications ENC User Manual page 202

Chapter 8 Application
Table 91 RMON > Event / Alarm > Event List Add/Edit (continued)
LABEL
Cancel
Ok
8.2.3.2 View Alarm Logs
Use this screen to configure events and alarms that occur when the sampled data exceeds the
specified threshold. To open this screen, select an entry in the Alarm List and click View Log in
the Application > RMON > Event /Alarm screen.
Figure 151 RMON > Event / Alarm > View Log
The following table describes the labels in this screen.
Table 92 RMON > Event / Alarm > View Log
LABEL
Event Index
Alarm Type
Log Index
Last Send Time
Variable
202
DESCRIPTION
Click this to save the settings and close this screen.
Click this to discard all changes and close the screen.
DESCRIPTION
This field displays the associated event's index number for this alarm log.
This field displays whether this alarm log was generated because the value was higher
than the RISING threshold or lower than the FALLING threshold.
This field displays the index number of the alarm log.
This field displays the date and time the alarm log was generated by the device.
This field displays the name of the MIB field whose data was sampled.
ENC User's Guide