Table of Contents
Advertisement
The following table describes the fields in this screen.
Table 175 User Account > Add/Edit
LABEL
General Settings
Account Type
Name
Password
Verify Password
Email Address
Description
Map Access
Cancel
Ok
9.4 Server
Use this screen to configure the ENC's IP address or domain name, client login lockout, and mail
server settings. To open this screen, click Maintenance > Server.
Figure 267 Server
The following table describes the fields in this screen.
Table 176 Server
LABEL
Server Configuration
Server IP/Domain
ENC User's Guide
DESCRIPTION
Select the type of the new user account.
Type up to 32 alphanumeric characters (0-9, a-z, A-Z), underscores (_) and/or
hyphens (-) for the name of this account. Spaces are not allowed.
Type up to 32 characters for the corresponding password of the user account.
Type the same password again here to make sure that the one you typed above was
typed as intended.
Type a valid e-mail address for this user.
Type extra information about this user.
This section configures the Map(s) that are allowed the user to access.
Select Map(s) from the Available Maps field and click >> to move them to the
Allowed Map Access field. You can select Map(s) in the Allowed Map Access field
and click << to remove them from the list.
Click this to go back to the previous screen without saving any changes.
Click this to save your settings and close this screen.
DESCRIPTION
Type a new IP address or domain name if you want to change the current setting.
Chapter 9 Maintenance
319
Advertisement
Table of Contents
