ZyXEL Communications ENC User Manual page 195

Table 86 RMON > History (continued)
LABEL
Interval (sec)
Owner
8.2.2.1 Configuring an RMON History Entry
To configure a new RMON history entry, click Add in the Application > RMON > History screen.
To change the settings of a selected RMON history entry, click Edit in the screen.
Figure 146 RMON > History > Add/Edit
The following table describes the labels in this screen.
Table 87 RMON > History > Add/Edit
LABEL
Port number
Bucket
Requested
Interval
owner
Cancel
OK
8.2.2.2 Viewing the Table
Use this screen to display accumulated network statistics collected by the selected port or interface.
After selecting the port or interface you wish to display, click Table View on the Application >
ENC User's Guide
DESCRIPTION
This field displays the time between data samplings.
This field displays the application that created this entry.
DESCRIPTION
Select a port or an interface of the selected device that the ENC polls for data. The probe
sends data from this port.
Specify the number of data samplings the ENC requests the probe to store.
Enter the time (in seconds) between data samplings.
Enter a descriptive name of the application that creates this entry. You can use 1-31
printable characters. Spaces are allowed.
Click this to discard all changes and close the screen.
Click this to save the settings and close this screen.
Chapter 8 Application
195