ZyXEL Communications ENC User Manual page 231

Note: If you are editing a profile, the ENC will apply the changes to the associated
wireless APs right after you click Ok in this screen.
Figure 182 AP Manager > AP Profile > Add/Edit
The following table describes the labels in this screen.
Table 112 AP Manager > AP Profile > Add/Edit
LABEL
Profile Name
SSID
Channel
Transmit Power
System Name
ENC User's Guide
DESCRIPTION
Enter up to 32 characters for the name of wireless AP profile. You can use alphanumeric
(0-9, a-z, A-Z), underscores (_) and hyphens (-). Spaces are not allowed.
Enter a descriptive name (up to 32 printable SCII characters) which identifies the wireless
LAN. Wireless clients associating to the access point (AP) must have the same SSID.
When a wireless client scans for an AP to associate with, this is the name that is broadcast
and seen in the wireless client utility.
You can select Room No. from the drop-down list to postfix the configured room number
of the AP to the SSID.
Select Auto and a channel set (1, 6, 11 or 1, 4, 7, 11 or 1, 5, 9, 13) if you want the AP
automatically switches a channel within the channel set when the original channel has
problems with wireless interference. Alternatively, select Manual and a specific channel if
you want to fix the channel.
Set the output power this wireless AP profile uses. If there is a high density of APs in an
area, decrease the output power of the ENC to reduce interference with other APs. Select
one of the following 100%, 50% or 25%.
Select Use device's display name as system name to configure an wireless AP's
system name as its display name in the ENC when you apply this profile to the device.
Alternatively, select Customized and enter a name to configure the device's system name
as the specified name.
Chapter 8 Application
231