ZyXEL Communications ENC User Manual page 108

Chapter 4 Configuration
Note: For some device models, you may need to include write commands in your scripts.
If you do not use the write command, the changes will be lost when the device
restarts. You could use multiple write commands in a long script.
Figure 72 Configuration > Script Distribution > Add
Each field is described in the following table.
Table 32 Configuration > Script Distribution > Add
LABEL
Protocol
Name
Interval
Device List
108
DESCRIPTION
Select the protocol (Telnet or SSH) which the ENC uses to connect to the specified
device(s) and execute this script.
Enter up to 32 characters to specify a name for the script distribution entry.
Specify how long the ENC is to wait (in seconds) between sending two commands to the
entry's listed devices.
Note: You can put commands that need a longer time to process in a
separate script file and set a longer interval for it.
Use this table to select the devices to which you want to apply the script.
ENC User's Guide