ZyXEL Communications ENC User Manual page 270

Chapter 8 Application
Table 144 Captive Portal: Add
LABEL
Remove
Activate
Deactivate
Move
Status
Priority
SSID Profile
Schedule
Authentication
Description
OK
Cancel
8.7.8.2 Add/Edit Authentication Policy
This screen allows you to add authentication policies to captive portal interception. Click the Add or
Edit button (for an existing policy) in the Authentication Policy Summary table on the Captive
Portal screen to access this screen.
Figure 227 Captive Portal: Add Authentication Policy
The following table describes the labels in this screen.
Table 145 Captive Portal: Add Authentication Policy
LABEL
Enable Policy
Description
270
DESCRIPTION
To remove an entry, select it and click Remove. The ENC confirms you want to remove it
before doing so.
To turn on an entry, select it and click Activate.
To turn off an entry, select it and click Inactivate.
Click this to assign the selected policy a new Priority.
When you click the button, an entry box opens beside it. Enter the priority value, then
press [Enter].
This indicates whether a policy is active or inactive.
This indicates the priority of a policy.
Priority values are unique to each policy. If you want to adjust the priority, use the Move
button.
This indicates the SSID profile to which a policy belongs.
This indicates which Schedule objects (if any) is applied to the policy. A schedule object
allows you to configure which times the rule is in effect.
This indicates whether authentication is required for the policy.
This displays the description of the policy. It has no intrinsic value to the system.
Click OK to save your changes.
Click Cancel to exit this screen without saving your changes.
DESCRIPTION
Select this to enable the new authentication policy. You can later edit the authentication
policy and deselect it if you want to disable it.
Enter an optional description of the authentication policy. You can enter up to 60
characters.
ENC User's Guide