ZyXEL Communications ENC User Manual page 203

Table 92 RMON > Event / Alarm > View Log (continued)
LABEL
Description
Back
8.2.3.3 Alarm Parameters
Use this screen to view the thresholds for the selected alarm and the associated event settings. To
open this screen, select an alarm entry in the Alarm List and click Parameter in the Application
> RMON > Event /Alarm screen.
Figure 152 RMON > Event / Alarm > Parameter
The following table describes the labels in this screen.
Table 93 RMON > Event / Alarm > Parameter
LABEL
Condition
Threshold
Event Index
Event Status
Event Type
Event
Community
Event Owner
Event
Description
Back
8.2.3.4 Configuring an Alarm
To create a new RMON alarm, click Add in the Alarm List of the Application > RMON > Event /
Alarm screen.
ENC User's Guide
DESCRIPTION
This field displays:
• the related object ID (for example, 1.3.6.1.2.1.2.2.1.10.12),
• the data collection method and the data sampling's index number (for example,
delta=352),
• the name and the value of the threshold (for example, FALLING=50),
• the number of seconds between two data samplings (for example, interval=30),
• the index number of the alarm log (for example, alarmindex.1),
• the action(s) the device took when this alarm occurs (for examle, log-and-trap).
Click this to close this screen and go back to the previous screen.
DESCRIPTION
This field displays whether this is about the Rising or Falling threshold.
This field displays the threshold's value.
This field displays the associated event's index number for this alarm log.
This field displays whether the associated event is currently activated or not.
This field displays the action(s) the device should take when the selected alarm is
generated.
This field displays the SNMP Get/Set community the ENC uses to communicate with the
device.
This field displays the application name that created the associated event.
This field displays the description about the associated event.
Click this to close this screen and go back to the previous screen.
Chapter 8 Application
203