ZyXEL Communications ENC User Manual page 130

Chapter 5 Event
Table 46 Events > Configuration > Customize > Add/Edit (continued)
LABEL
Generic Type
Specific Type
Enterprise OID
Trap OID
Severity
Message
Action
Clear Correlated Events
Clear correlated
events
Available Events
Selected Correlate
Events
Cancel
OK
130
DESCRIPTION
This field is available if you select v1 in the SNMP Trap Version field. Select a trap
from the drop-down list box in order to associate it with this event. You can select a
standard generic trap (coldStart, warmStart, linkDown, linkUp,
authenticationFailure, egpNeighborLoss) or a vendor specific trap
(enterpriseSpecific).
This field is available and mandatory if you select enterpriseSpecific(6) in the
Generic Type field.
Enter a code number that identifies a specific trap supported by a vendor's devices.
This field is available if you select v1 in the SNMP Trap Version field. Type a MIB
object identifier (OID) or click the magnifier icon next to this field to find the object you
are looking for.
This field is available if you select v2c/v3 in the SNMP Trap Version field.
Type a MIB object identifier (OID) or click the magnifier icon next to this field to find the
object you are looking for.
Select the severity level for the event you want to display in the ENC. The choices and
the severity level from low to high are Info, Warning, Minor, Major, and Critical.
Type the information you wish to display for the event in the ENC. You can select
variables from the drop-down list box to include in the message. The available variables
are System Name, System OID, System Description and SNMP Varbinds.
SNMP Varbinds - This is variable bindings. Each variable binding associates a
particular MIB object's instance with its current value.
Select the action profile to apply to this event. The ENC takes the action when it
receives this event.
Select this to have the ENC automatically acknowledge any selected correlated events.
This field displays all available correlated events that you can select. Select one or more
events (select while pressing [Ctrl]) and press the right arrow button (>) to add them
into the selected list at the right field. Use the double right arrow button (>>) to add all
available events to the right field.
This field displays the event(s) you selected to make a correlation with this event. Select
one or more events (select while pressing [Ctrl]) and press the left arrow button (<) to
remove them from this field. Use the double left arrow button (<<) to remove all events
from this field.
Click this to discard the changes and close this screen.
Click this to save the changes and close this screen.
ENC User's Guide