ZyXEL Communications ENC User Manual page 215

Table 99 VLAN Management > Port Setting (continued)
LABEL
Port VID
Ingress Check
GVRP
Acceptable
Frame Type
VLAN Trunking
Apply
Reset
ENC User's Guide
DESCRIPTION
Enter a number between 1 and 4094 as the port VLAN ID. If an incoming frame received
by the port is untagged, the device adds the port VLAN ID (PVID) to the frame.
Select this to have the device discard incoming frames for VLANs that do not include this
port in its member set.
Clear this check box to disable ingress filtering on the port.
GVRP (GARP VLAN Registration Protocol) is a registration protocol that defines a way for
switches to register necessary VLAN members on ports across the network.
Select this check box to allow GVRP on this port.
Specify the type of frames allowed on a port. The available options vary depending on
device models.
Select All from the drop-down list box to accept all untagged or tagged frames on this
port. This is the default setting.
Select Tag Only to accept only tagged frames on this port. All untagged frames will be
dropped.
Enable VLAN Trunking on ports connected to other switches or routers (but not ports
directly connected to end users) to allow frames belonging to unknown VLAN groups to
pass through the device.
Click Apply to save your changes.
Click Reset to discard your changes and reset the fields to their last saved settings.
Chapter 8 Application
215