Table of Contents
Advertisement
Chapter 2 Tutorials
Click each device to modify the number of the room where it is located. Click Apply to save the
3
change.
You have finished the registration. You can then click the Edit AP Profile icon (
the wireless AP profile settings.
2.10.3 Method 3
If you have a DHCP server in the network but it does not support DHCP option 224. You can use this
method. After your NWA1300-N Series APs are turned on and obtain an IP address from the DHCP
server, you can use the Auto-Discovery function to add them to the ENC. Do the following:
In the ENC, click Tool > Auto-Discovery.
1
Select Enable Ping and Root subnet / Incremental in the Discover Option field.
2
78
) to configure
ENC User's Guide
Advertisement
Table of Contents
