ZyXEL Communications ENC User Manual page 37

1.3.5.1 Add Network
Use this screen to configure a new network in the ENC. To open this screen, right-click the Root
Subnet or a network node and select Add Network.
Figure 19 Right-click Menus: Add Network
The following table describes the labels in this screen.
Table 11 Right-click Menus: Add Network
LABEL
Network Name
Network Address
Subnet Mask
Network Type
Description
Cancel
OK
ENC User's Guide
DESCRIPTION
Enter up to 32 characters for the name of a network. You can use alphanumeric
characters (0-9, a-z, A-Z), underscores (_), hyphens (-) and/or dots (.).
Enter the IP address of the network.
Enter the subnet mask of the network.
Select the type of the network. The available options are General, Bus, Star, Ring
and Tree. Each type associates an icon for your differentiation.
Type additional information about the network in this field.
Click this to exit this screen and go back to the previous screen.
Click this to save the changes.
Chapter 1 Web Configurator
37