ZyXEL Communications ENC User Manual page 237

IP Surveillance management functions. See
different types of switches.
Figure 187 Link Maintenance
The following table describes the labels in the Add Link screen.
Table 116 IP Surveillance > Link Maintenance > Add/Edit
LABEL
Device 1
Device 2
Port 1
Port 2
Cancel
Ok
After the links have been added, they can be viewed in the Map View screen. Click IP
Surveillance > Map View to access this screen. In the map below, Access Switches S3 and S4 are
linked to Aggregate Switch S2. S2 is linked to the NVR Switch S1. See
ENC User's Guide
DESCRIPTION
This field displays the first device's IP address that you selected.
This field displays the second device's IP address that you selected.
Select the port on the first device that the link is connected to.
Select the port on the second device that the link is connected to.
Click this to discard the changes and exit this screen.
Click this to save the changes and exit this screen.
Section 8.6 on page 235
Chapter 8 Application
for information on the
Section 8.6.7 on page 248
237