Application; Chapter 8 Application; Overview; What You Can Do In This Chapter - ZyXEL Communications ENC User Manual

8.1 Overview

Use the sub-menus under Application to look at and configure specific functions such as RMON
(Remote Network Monitor), VLAN, port management and Wireless Access Point settings for ZyXEL
Ethernet Switches.

8.1.1 What You Can Do in This Chapter

• Use the Application > RMON screens (see
statistics, history, event and alarm settings.
• Use the Application > VLAN Management screens (see
VLAN settings for specific devices.
• Use the Application > Port Management screens (see
port management basic, bandwidth control, broadcast storm control, security, authentication
settings for specific devices.
• Use the Application > AP Manager screen (see
settings for specific devices which supports wireless access point function.
• Use the Application > IP Surveillance screens
Surveillance cameras.
• Use the Application > Wireless Control Management screens
manage wireless controllers and APs.

8.2 RMON

Similar to SNMP, RMON (Remote Network Monitor) allows you to gather and monitor network
traffic.
Both SNMP and RMON use an agent, known as a probe, which are software processes running on
network devices to collect information about network traffic and store it in a local MIB
(Management Information Base). With SNMP, a network manager has to constantly poll the agent
to obtain MIB information. With RMON, the probe is located on a remote device (ZyXEL Ethernet
Switches), so a network manager (the ENC) does not need to constantly poll the probe for
information. The probe communicates with the network manager via SNMP.
ENC User's Guide
C
H A PT ER

Application

Section 8.2.1 on page 188) to configure RMON
Section 8.3 on page
Section 8.4 on page
Section 8.5 on page
(Section 8.6 on page
(Section 8.7 on page
8
206) to configure
216) to configure
230) to configure wireless
235) to manage IP
258) to
187