ZyXEL Communications ENC User Manual page 189

8.2.1.1 Add/Edit an RMON Port
If you want to view network statistics on one port or interface but the port is not in the Ethernet
Statistics List in the Application > RMON > Statistics screen, click Add to add the port or
interface. To do this, select a device that supports this feature in the OTV, Device View or Group
View panel and click Add in the Application > RMON > Statistics screen.
You can also change the RMON owner setting for the port or interface by selecting it and then
clicking Edit in the Application > RMON > Statistics screen.
Note: At the time of writing, this screen is only available for ZyXEL Ethernet Switches
using 3.90 version firmware.
Figure 142 RMON > Statistics > Add/Edit
The following table describes the labels in this screen.
Table 83 RMON > Statistics > Add/Edit
LABEL
Port Number
Owner
Cancel
Ok
8.2.1.2 Viewing the Table
This screen displays network statistics for the selected port(s) or interface(s) as a table. After
selecting the data source(s) you wish to display, click Table View on the Application > RMON >
Statistics screen to open this screen.
Figure 143 RMON > Statistics > Table View
ENC User's Guide
DESCRIPTION
Enter the number of one port or interface to add to the ENC for viewing network statistics.
This field displays the port's number and is read-only when you are editing a port statistic
entry.
Enter a descriptive name of the application that creates this entry. You can use 1-31
printable ASCII characters. Spaces are allowed.
Click this to discard all changes and close the screen.
Click this to save the settings and close this screen.
Chapter 8 Application
189