ZyXEL Communications ENC User Manual page 301

Wireless Profile > Zone. To create a new Zone profile click the Add button, or to edit an existing
one select a profile from the list and click the Edit button.
Figure 244 Zone: Add
The following table describes the labels in this screen.
Table 157 Zone: Add
LABEL
Name
Block Intra-zone
Traffic
Member List
OK
Cancel
ENC User's Guide
DESCRIPTION
Type the name used to refer to the zone. You may use 1-30 alphanumeric characters,
underscores( _ ), or dashes (-), but the first character cannot be a number. This value is
case-sensitive.
Select this check box to block network traffic between members in the zone.
Available lists the interfaces that do not belong to any zone. Select the interfaces that
you want to add to the zone you are editing, and click the right arrow button to add them.
Member lists the interfaces that belong to the zone. Select any interfaces that you want
to remove from the zone, and click the left arrow button to remove them.
Click OK to save your customized settings and exit this screen.
Click Cancel to exit this screen without saving.
Chapter 8 Application
301