Table of Contents
Advertisement
Chapter 8 Application
Table 138 AP Detail (continued)
LABEL
Security Mode
Forwarding Mode
VLAN ID
8.7.3 AP Group
You can configure AP groups that include APs managed by the NXC5200. The AP group can include
APs on different NXC5200s. You can create an AP group and apply profile settings to a group of APs
instead of configuring one AP at a time. To view the AP Group list, click an AP Group in the
Wireless Controller Management > AP Group screen. To create an AP group click the Add
button, or to edit an existing one, select an AP group from the list and click the Edit button. The
following screen displays.
Figure 220 AP Group
The following table describes the labels in this screen.
Table 139 AP Group
LABEL
Group Name
Description
Device
+
-
AP
Select/Unselect
OK
Cancel
264
DESCRIPTION
This displays the security mode in which the SSID is operating.
This displays the forwardnig mode in use by the SSID.
This displays the VLAN ID associated with the SSID.
DESCRIPTION
Specify the name of the AP group. You may use 1-30 alphanumeric characters.
Specify a description for the group.
Click the device name in this column to select or deselect all APs on the specific device.
Click this to expand the list of APs for a device.
Click this to collapse the list of APs for a device.
This field displays the AP name.
Click this to add or remove a AP from the AP group.
Click OK to save your changes.
Click Cancel to exit this screen without saving your changes.
ENC User's Guide
Advertisement
Table of Contents
