ZyXEL Communications ENC User Manual page 282

Chapter 8 Application
Note: This screen's options change based on the Security Mode selected.
Figure 232 Security List: Add
The following table describes the labels in this screen.
Table 150 Security List: Add
LABEL
Profile Name
Security Mode
802.1X
Radius Server
Type
Primary /
Secondary
Radius Server
Activate
Radius Server IP
Address
Radius Server
Port
Radius Server
Secret
Auth. Method
Reauthentication
Timer
282
DESCRIPTION
Enter up to 30 alphanumeric characters for the profile name. This name is only visible in
the Web Configurator and is only for management purposes. Spaces and underscores are
allowed.
Select a security mode from the list: none, wep, wpa, wpa2, or wpa2-mix. See
8.7.13.1 on page 281 for more information on security modes.
Select this to enable 802.1x secure authentication.
Select Internal to use the NXC5200's internal authentication database, or External to
use an external RADIUS server for authentication.
Select this to have the NXC5200 use the specified RADIUS server.
Enter the IP address of the RADIUS server to be used for authentication.
Enter the port number of the RADIUS server to be used for authentication.
Enter the shared secret password of the RADIUS server to be used for authentication.
This field is available only when you set the RADIUS server type to Internal.
Select an authentication method if you have created any in the Wireless Controller
Management > Profile > Wireless Profile > Auth. Method screen.
Enter the interval (in seconds) between authentication requests. Enter a 0 for unlimited
requests.
Section
ENC User's Guide