Table of Contents
Advertisement
Chapter 8 Application
Table 94 RMON > Alarm Config > New
LABEL
Threshold
Event Index
Cancel
OK
8.3 VLAN Management
Use this screen to view a list of configured IEEE 802.1Q VLANs and their group members. To open
this screen, click Application > VLAN Management. The screen appears as
device for which you wish to configure the VLAN settings from the Device or VLAN Group list on
the left side of the screen.
Note: At the time of writing, this screen is only available for some ZyXEL Ethernet
Switches. See
206
DESCRIPTION
Specify the falling threshold (between 0 and 2147483647). When a value is less than or
equal to this threshold, the probe triggers an alarm.
Select an index number of a falling event.
Click this to discard all changes and close the screen.
Click this to save the settings and close the screen.
Appendix A on page 349
for the supported ZyXEL device list.
Figure
154. Select a
ENC User's Guide
Advertisement
Table of Contents
