ZyXEL Communications ENC User Manual page 179

Enterprise network center
Table of Contents

Advertisement

Figure 134 Report > Reports > Add (Top N Report)
Each field is described in the following table.
Table 78 Report > Reports > Add
LABEL
Step 1 - General Properties
Report Name
Report Type
Descriptions
Cancel
Next
Step 2
Display Name
Device Type
Device Model
IP Address
Status
Firmware Version
ENC User's Guide
2
DESCRIPTION
Enter a name to identify the report. Numbers (0-9), letters (a-z, A-Z), hyphen (-)
and the underscore (_) are allowed. Spaces are not allowed.
Select the type of the report.
Enter the further information for the report.
Click this to discard the changes and exit this screen.
Click this to proceed to the next step.
Enter a name of the report, which you want to display on the top of the report. It is
recommended to specify the related device names in this field. Numbers (0-9),
letters (a-z, A-Z), hyphen (-) and the underscore (_) are allowed. Spaces are not
allowed. This field is optional.
Select which type of devices that you want to display the related information in the
report. The options include Host, Switch, Firewall, Wireless AP, Router/
Gateway, Wireless Controller, IP PBX, IP Phone, Peripheral, All (means all
types mentioned), Others (means all types not mentioned).
Select a specific model if you want to display the related information only in the
report. Otherwise, leave it as the default (All). The available options vary depending
on the device type you selected.
Enter a valid IP address if you want to display the related device's information only in
the report. Otherwise, leave it as blank.
Select a specific status of devices that you want to display the related information
only in the report. Otherwise, leave it as the default (All). unknown means a device
is unreachable before the ENC determines it is offline.
This field is available if you selected an Inventory related report.
Enter the major firmware version of the device(s) that you are looking for to display
the related device's information only in the report. Otherwise, leave it as blank.
Chapter 7 Report
3
179

Advertisement

Table of Contents
loading

Table of Contents