Script Distribution Add - ZyXEL Communications ENC User Manual

Each field is described in the following table.
Table 31 Configuration > Script Distribution
LABEL
Device Name
Add
Edit
Remove
View Log
check box
Status
Name
Device Amount
Protocol
Start Time
End Time

4.3.1 Script Distribution Add

Use script files to apply commands that you specify.
Click Configuration > Script Distribution > Add to open the following screen. Use this screen to
create a script distribution entry to create, store, name, and run script files.
ENC User's Guide
DESCRIPTION
To only display scripts for a specific model, enter a part of the device name or the full name
here and click Search.
Click this to create a new script distribution entry for having the ENC apply a script to
managed devices.
Select an entry with a status of Waiting and click this to edit the entry.
Select an entry and click this to delete it. You cannot delete an entry that has a status of
Running.
Select an entry and click this to display a log of the script's distribution history.
Select the check box of an entry and click Edit, Remove or View Log to take the action for
the entry respectively. Select or clear the check box at the table heading line to select or
clear all check boxes in this column.
This shows whether the script distribution is Running, waiting to start (Waiting), has failed
(Fail), has all completed (Success) or has partial completed (Partial Success).
This field displays the name of the entry.
This is to how many devices this script distribution entry applies.
This shows the protocol (Telnet or SSH) which the ENC uses to connect to the specified
device(s) and execute this script.
This is the date and time that the script distribution entry was (or is scheduled to be)
applied.
This is the date and time the ENC stopped applying the script distribution. This is N/A if the
script distribution has not yet been applied.
Chapter 4 Configuration
107