ZyXEL Communications ENC User Manual page 170

Chapter 6 Tool
To open this screen, click Tool > Syslog View.
See Section 6.10.3 on page 172
Section 6.10.2 on page 171
Figure 122 Tool > Syslog View > Log Viewer
The following table describes the labels in this screen.
Table 73 Tool > Syslog View > Log Viewer
LABEL
Time
Facility
Severity
Source
170
for more information about update frequencies for log entries. See
for more information about the source data used by the report.
DESCRIPTION
Select within the number of hours or days in the past the log you are looking for was
received by the ENC for the search criteria. The options are Last 24 hours, Last 48
hours, Last 5 days, Last 7 days and Last 30 days. Select Custom to display additional
fields if you want to customize a period for the search criteria. Click the text box next to
Start Date or End Date, a calendar displays as shown next.
Figure 123 Customize a Period
Choose a date (or click Today) and click Done to close the calendar. The ending date
must not be earlier than the starting date.
Select a location (local0~local7) from the drop down list box. The log facility allows you
to display the logs in different files in the syslog server of the ENC. Select All to display all
messages in all the files on the ENC.
Select which severity level of log entries you want to see. You can also select All.
Severity ranking follows RFC 3164 of the SYSLOG protocol and is defined as follows.
• Emergency - System is unusable
• Alert - Action must be taken immediately
• Critical - Critical conditions
• Error - Error conditions
• Warning - Warning conditions
• Notice - Normal but significant condition
• Info - Informational messages
• Debug - Debug-level messages
Enter the source IP address that generated the log entry.
ENC User's Guide