Table of Contents
Advertisement
Chapter 6 Tool
To open this screen, click a device in the Tool > Inventory > Network screen.
Figure 108 Tool > Inventory > Network Details
The following table describes the labels in this screen.
Table 61 Tool > Inventory > Network Details
LABEL
Display Name
Status
IP Address
Network Mask
Discovered
Member
Discovered Date
Type
Last Update
Apply
Back
6.4 Device Group
Use this screen to logically group managed devices that can be configured together. You may
distribute a script to a group of devices, for example.
156
DESCRIPTION
This field displays the descriptive name of the network. Enter a new name (up to 32
printable character; spaces are not allowed) if you want to modify it.
This field displays whether the ENC can detect the devices in the network.
Online - all managed devices in the network are reachable.
Partial Online - some of the managed devices in the network are not reachable.
Offline - all managed devices in the network are not reachable.
Un-monitored - no device is found in the network. This might be caused by a NAT device
that exists between the network and the ENC.
This field displays the IP address of the network.
This field displays the subnet mask of the network.
This field displays the number of devices that the ENC has discovered on the network.
This field displays the date and time this network was discovered and added to the ENC.
This field displays the type of the network (General, Bus, Star, Ring or Tree. Select an
appropriate one if you want to change it.
This field displays the date and time the device's information in this screen was last
updated.
Click this to save the changes.
Click this to exit this screen and go back to the previous screen.
ENC User's Guide
Advertisement
Table of Contents
