ZyXEL Communications ENC User Manual page 180

Chapter 7 Report
Table 78 Report > Reports > Add
LABEL
Discovered Date
Category
Ack/Unack
Severity
Period
Source
180
DESCRIPTION
This field is available if you selected the Inventory List Report.
Select how long ago the device(s) that you are looking for were added to the ENC.
Select Custom to display the additional fields in this screen as shown.
Figure 135 Specify a Discover Date
Click the text box next to Start Date or End Date and choose a date (or click
Today) from the displayed calendar. Then click Done. The devices added during this
period will be shown in the report.
This field is available if you selected an Events related report. Select the category of
events that you want to display in the report.
• Threshold Crossing: This is about a parameter's value is higher or lower than a
set threshold.
• Configuration: This is about a configuration change on the ENC.
• Topology: This is about a network topology change detected by the ENC.
• SNMP Traps: This is about SNMP traps sent from Devices.
• All: This means all categories above.
This field is available if you selected an Events related report.
Select whether the events that you want to display have been Acknowledged or not
(Unacknowledged). All means both.
Select the severity of events should be equal to (=), greater or equal to (>=), less or
equal to (<=) a severity level selected on the second drop-down list box. See
73 on page 170 for more information about severity.
Select how long ago the events that you are looking for were added to the ENC.
Select Custom to display the additional fields in this screen as shown.
Figure 136 Specify a Period
Click the text box next to Start Date or End Date and choose a date (or click
Today) from the displayed calendar. The events added to the ENC during this period
will be shown in the report.
Select which person has acknowledged the events that you are looking for.
Table
ENC User's Guide