Table of Contents
Advertisement
Chapter 6 Tool
The following table describes the labels in this screen.
Table 63 Tool > Device Group Add/Edit
LABEL
Group Name
Description
Add
Device Name
Device Model
Device IP
6.5 PING/Trace Route
Use this screen to test the connection from the device to a specified IP address. The Ping function
only tests whether the specified device responds. The Trace Route function additionally tests how
a packet is transmitted and routed through devices between the ENC and the device. To open this
screen, click Tool > PING/Trace Route.
Figure 111 Tool > PING/Trace Route
The following table describes the labels in this screen.
Table 64 Tool > PING/Trace Route
LABEL
Ping
TraceRoute
IP
158
DESCRIPTION
Type up to 20 alphanumeric characters (0-9, a-z, A-Z), underscores (_), and/or hyphens (-)
for the name of the group. Spaces are not allowed.
Type up to 80 printable characters for additional information about this group.
Click this to add device(s) to this group.
This field displays the name of the device being associated with this group.
This field displays the model name of the device.
This field displays the address of the device.
DESCRIPTION
Select this and enter the IP address of a device (in the IP field) to which you want to test
the connection from the ENC.
Enter the IP address of the device to which you want to send a traceroute packet from the
ENC.
Select this and enter the IP address of a device (in the IP field) to which you want to test
the connection from the ENC.
Enter a valid IP address.
ENC User's Guide
Advertisement
Table of Contents
