Table of Contents
Advertisement
4.4 Configuration File Update/Backup
Use these screens to upload configuration files to the ENC and have the ENC use them to configure
managed devices.
You must be logged in with system administrator rights to use this function.
Note: Do NOT turn off the switch during the updating process, as it may corrupt the
firmware and make the selected switch unusable.
4.4.1 Configuration File List
Click Configuration > Update/Backup to display the list of configuration files.
Figure 76 Configuration > Update/Backup
The following table describes the labels in this screen.
Table 33 Configuration > Update/Backup
LABEL
Device Model
Firmware Version
Backup Time
Add
Remove
Export
check box
File Name
Device Model
Firmware Version
Backup Time
Description
Admin
ENC User's Guide
DESCRIPTION
To only display configuration files for a specific model, select the model here and
click Search.
To only display configuration files of a specific firmware version, select the model
in the Device Model field and then select the firmware version and click Search.
Select a time period to limit up to how long ago the configuration files were saved
to the ENC and click Search.
Click this to upload a configuration file to the ENC.
Select an entry and click this to delete it.
Select an entry and click this to view the configuration file or save it to the
computer you are using to access the ENC.
Select the check box of an entry and click Remove or Export to take the action
for the entry respectively. Select or clear the check box at the table heading line to
select or clear all check boxes in this column.
This is the file name of the configuration file saved on the ENC.
This field displays the name of the device model for which the configuration file
was uploaded.
This field displays the version of the firmware file.
This is when the configuration file was saved to the ENC.
This field displays any special information that you specified about the
configuration file.
This is the name of the administrator who uploaded the configuration file or set the
ENC to back up the configuration file from a managed device.
Chapter 4 Configuration
111
Advertisement
Table of Contents
