Table of Contents
Advertisement
To open this screen, click a device in the Name field in the Tool > Inventory > Device screen,
then click the MAC Table tab.
Figure 105 Tool > Inventory > Device > MAC Table
The following table describes the labels in this screen.
Table 58 Tool > Inventory > Device > MAC Table
LABEL
MAC Table on host
Port
MAC Address
Status
Search
Refresh
Port
MAC Address
Status
6.2.8 Inventory Device Details - Wireless
Use this screen to view the wireless settings of the selected device which supports the wireless AP
feature.
To open this screen, click a wireless AP in the Name field of the Tool > Inventory > Device
screen, then click the Wireless tab.
Note: At the time of writing, this feature is only available for NWA1300-N Series.
ENC User's Guide
DESCRIPTION
This field displays the selected device's IP address.
Enter a port number here if you want to search any MAC address entries to which the
port is connected.
Enter a MAC address here if you want to search the specified MAC address entry.
Select a status from the drop-down list (All, other, invalid, learned, self, or mgmt) for a
search criteria.
Click this button to search the matched entries from the selected device's MAC table.
Click this to update the MAC table.
This field displays the number of a port the MAC entry is related.
This field displays a MAC address which indicates you can access the host through the
port.
This field displays how this MAC entry was added.
Chapter 6 Tool
153
Advertisement
Table of Contents
