Table of Contents
Advertisement
Chapter 8 Application
8.7.19 AP Configuration
Use this screen to manage all of the APs connected to the NXC5200. Click Wireless Controller
Management > Configuration > AP Configuration to access this screen.
Figure 245 AP Configuration
The following table describes the labels in this screen.
Table 158 AP Configuration
LABEL
Status
AP Description
IP Address
MAC Address
Profile
Configuration
Status
Model
NXC5200
Apply Time
The following table describes the icons in this screen.
Table 159 AP Status Icons
LABEL
302
DESCRIPTION
This visually displays the AP's connection status with icons. For details on the different
Status states, see the next table.
This field displays the AP's description, which you can configure by selecting the AP and
clicking the Edit button.
This field displays the IP address of the AP.
This field displays the MAC address of the AP.
This field displays the name of the profile that is binded to the device.
Note: Each device can only be binded to one profile, but each profile can be binded to
multiple APs.
This field displays the configuration status of the AP: Waiting, Running, Success or Fail.
This field displays the AP's hardware model information. It displays "N/A" (not applicable)
only when the AP disconnects from the NXC5200 and the information is unavailable as a
result.
This field displays the NXC5200 which the AP belongs to.
This field displays the time at which the profile was applied to the AP.
DESCRIPTION
This is an AP that is not on the management list.
This is an AP that is on the management list and which is online.
ENC User's Guide
Advertisement
Table of Contents
