ZyXEL Communications ENC User Manual page 229

Note: The available fields in the MAC Authentication section may vary depending on
device models.
Figure 179 Port Management > Authentication > 802.1x Authentication
The following table describes the labels in this screen.
Table 110 Port Management > Authentication > 802.1x Authentication
LABEL
Activate 802.1x
Authentication
Copy
Port
802.1x
Reauthentication
Reauthentication
Timer
Apply
Reset
ENC User's Guide
DESCRIPTION
Select this check box to permit 802.1x authentication on the device.
Note: You must first enable 802.1x authentication on the device before configuring it on
each port.
Click this to copy the selected port's settings to another port. The screen appears as
shown next.
Figure 180 Copy
Specify the port number to which you want to copy the selected port's settings. Click OK
to apply the changes to the Port Management > Authentication > 802.1x
Authentication screen. Otherwise, click Cancel to discard the change and close this
screen.
This field displays a port number.
Select this checkbox to permit 802.1x authentication on this port. You must first allow
802.1x authentication on the device before configuring it on each port.
Specify if a subscriber has to periodically re-enter his or her username and password to
stay connected to the port.
Specify the length of time required to pass before a client has to re-enter his or her
username and password to stay connected to the port.
Click Apply to save your changes.
Click Reset to discard your changes and reset the fields to their settings last time saved.
Chapter 8 Application
229