Table of Contents
Advertisement
Chapter 6 Tool
To open this screen, click a device in the Name field in the Tool > Inventory > Device screen,
then click the Port Analyzer tab.
Figure 104 Tool > Inventory > Device > Port Analyzer
The following table describes the labels in this screen.
Table 57 Tool > Inventory > Device > Port Analyzer
LABEL
Refresh
LocalAddress
LocalPort
RemoteAddress
RemotePort
State
Address
Port
Back
6.2.7 Inventory Device Details - MAC Table
Use this screen to view all the MAC table entries on the selected device.
152
DESCRIPTION
Click this to update the information in each table respectively.
This field displays the IP address of the device.
This field displays the number of a TCP port on the device, which is in use.
This field displays the IP address of a remote device which is trying to connect or has
connected to the device. 0.0.0.0 displays if no remote device is accessing the port on the
local device.
This field displays the number of a port on the remote device, which is used to
communicate with the local device for the service. 0 displays if no remote device is
accessing the port on the local device.
This field displays the connection status between the local and remote ports. listen
displays if the local port is listening to a connection request. established displays if the
connection has been successfully established.
This field displays the IP address of the device.
This field displays the number of a UDP port the device uses to send UDP packets.
Click this to exit this screen and go back to the previous screen (Tool > Inventory >
Device).
ENC User's Guide
Advertisement
Table of Contents
