The Ap Configuration Screen - ZyXEL Communications ENC User Manual

Table 112 AP Manager > AP Profile > Add/Edit (continued)
LABEL
Authenticatio
n Method
Cancel
Ok

8.5.3 The AP Configuration Screen

Use this screen to search and check the basic settings such as IP address, MAC address and AP
profile for wireless APs. To open this screen, click Application > AP Manager > AP
Configuration.
Figure 183 AP Manager > AP Configuration
The following table describes the labels in this screen.
Table 113 AP Manager > AP Configuration
LABEL
Name
Device Model
IP Address
Status
Device Group
Enable Status
Polling
AP Profile
Search
Access Web GUI
Edit AP Profile
ENC User's Guide
DESCRIPTION
Select Open System, Shared Key or Both.
This field specifies whether the wireless clients have to provide the WEP key to login to the
wireless network. Keep this setting at Both or Open System unless you want to force a
key verification before communication between the wireless client and the wireless AP
occurs. Select Shared Key to force the clients to provide the WEP key prior to
communication.
Click this to discard all changes and close the screen.
Click this to save the settings and close this screen.
DESCRIPTION
Enter the full or partial name of the device you are looking for.
Select the device model name for the search criteria.
Enter an IP address for the search criteria.
Select the device's status (Online, Offline, Un-Monitorer, or Un-Registered) for the
search criteria.
Select the group to which the device belongs.
Select whether the device's status polling is enabled (true) or not (false) for the search
criteria.
Select an AP profile with which the device is applied.
Click this to search the matched device(s) according to your input criteria.
Select a device from the table and click this to access the Web Configurator.
Select a device from the table and click this to edit the applied AP profile.
Chapter 8 Application
233