Zone - ZyXEL Communications ENC User Manual

Table 156 VLAN: Add (continued)
LABEL
Check Port
OK
Cancel

8.7.18 Zone

Set up zones to configure network security and network policies in the NXC5200. A zone is a group
of interfaces. The NXC5200 uses zones instead of interfaces in many security and policy settings,
such as firewall rules and anti-virus. Zones cannot overlap. Each interface can be assigned to just
one zone.
Figure 243 Example: Zones
ENC User's Guide
DESCRIPTION
This field only displays when you set the Check Method to tcp. Specify the port number
to use for a TCP connectivity check.
Click OK to save your changes.
Click Cancel to exit this screen without saving.
Chapter 8 Application
299