ZyXEL Communications ENC User Manual page 200

Chapter 8 Application
• which port or interface on the port will generate this alarm,
• a variable that you wish to monitor,
• which method to use for collecting data samplings,
• the falling and rising threshold values that determine when to trigger this alarm,
• and the application name that creates this alarm entry.
Figure 149 RMON > Event / Alarm
The following table describes the labels in this screen.
Table 90 RMON > Event / Alarm
LABEL
Event List
Add
Edit
Remove
check box
Type
Last Event Send
Community
Description
Owner
Alarm List
Add
Edit
Remove
200
DESCRIPTION
Click this to create a new event.
Select an entry in the table and click this to modify it.
Select an entry in the table and click this to delete it.
Select the check box of an entry and click Edit or Remove to take the action for the entry
respectively. Select or clear the check box at the table heading line to select or clear all
check boxes in this column.
This field displays the alarm type (NONE, LOG, TRAP or LOG & TRAP).
LOG - The device generates a log when an associated alarm occurs.
TRAP - The device sends a trap when an associated alarm occurs.
NONE - The device does not generate any logs or traps when an associated alarm occurs.
LOG & TRAP - The device generates a log and sends a trap when an associated alarm
occurs.
This field displays the date and time the event was last generated and sent from the
device to the ENC.
This field displays the SNMP Get/Set community setting.
This field displays further information about the event.
This field displays the name of the application that created this event.
Click this to create a new alarm.
Select an entry in the Alarm List table and click this to modify it.
Select one or more entries in the Alarm List table and click this to delete them.
ENC User's Guide