ZyXEL Communications ENC User Manual page 43

The following table describes the labels in this screen.
Table 14 Right-click Menus: Batch Add Devices
LABEL
Batch Add Devices - Step 1
File to Import
Cancel
Next
Batch Add Devices - Step 2
Device(s) ready to
import
Device Name
Device Type
Device Model
MAC
Mapped Room No.
Device(s) not ready to
import
Device Name
Reason
Cancel
Previous
Import
1.3.5.5 Cut/Paste Device
To disassociate a device from a network, log into the Web Configurator as an administrator or
operator and do the following steps.
In the OTV panel, right-click on a device and click Cut Device.
1
Right-click on a network to which you want to move the device and click Paste Device.
2
The device re-associates to the network.
3
ENC User's Guide
DESCRIPTION
Double click the field or click Browse to locate the text or CSV file you want to
import. The file should contains devices' MAC address and room number mappings by
following the format below:
00A0C5001001,Room1001
00A0C5001002,Room1002
Click this to exit this screen and go back to the previous screen.
Click this to proceed to the next screen.
This section displays the list of devices that are ready to be imported.
This field displays the name of a device.
This field displays the device type you just selected.
This field displays the model name and the associated icon you just selected.
Enter the MAC address of the device.
Enter the number of the room where the device is located.
This section displays the list of devices that are not ready to be imported because of
insufficient information.
This field displays the name of a device.
This field displays the reason why the ENC cannot import the device yet.
Click this to exit this screen and go back to the previous screen.
Click this to go back to the last screen.
Click this to start the import process.
Chapter 1 Web Configurator
43