ZyXEL Communications ENC User Manual page 59

The Add Script Distribution screen appears. Select Telnet and enter the script name
6
(CollectBasicDeviceInfo in this example). Leave the Interval to its default value. Click Add.
In the Select Device screen, select the device(s) to which you want to apply the script. Click OK.
7
Type CLI commands in the Commands section. You can use a pound sign (#) to write a note in the
8
script. Configure a schedule (select Send Now in this example). Click Ok.
Wait a while until the script is successfully applied to the devices (Success, Fail, or Partial
9
Success displays in the Status field). Select the script and then click View Log.
10 Then You can see the results of applying the CLI commands.
ENC User's Guide
Chapter 2 Tutorials
59