Inventory Device Details - Routing - ZyXEL Communications ENC User Manual

Table 54 Tool > Inventory > Device > Interface (continued)
LABEL
Speed
PhysAddress
Status
InBPS
OutBPS
TotalBPS
InUtil
OutUtil
TotalUtil
ErrorsPercent
Back

6.2.4 Inventory Device Details - Routing

Use this screen to view the current routing information on the device. The device uses static routes
to send data and respond to remote devices that are not reachable through the default gateway.
For example when sending SNMP traps or using ping to test IP connectivity.
To open this screen, click a device in the Name field in the Tool > Inventory > Device screen,
then click the Routing tab.
Figure 102 Tool > Inventory > Device > Routing
ENC User's Guide
DESCRIPTION
This field displays the speed (in bytes) of the Ethernet connection on this port.
This field displays the MAC address of this port.
This field displays if the port is up or down.
This field displays the packet receiving rate (in bits per second) on this port.
This field displays the packet transmission rate (in bits per second) on this port.
This field displays the total packet receiving and transmission rate (in bits per second) on
this port.
This field displays the bandwidth utilization (as a percentage) of incoming packets
received on this port.
This field displays the bandwidth utilization (as a percentage) of outgoing packets
transmitted on this port.
This field displays the total bandwidth utilization (as a percentage) of incoming and
outgoing packets received and transmitted on this port.
This field displays the bandwidth utilization (as a percentage) of errors received on this
port.
Click this to exit this screen and go back to the Tool > Inventory > Device screen.
Chapter 6 Tool
149