Table of Contents
Advertisement
8.7.16.1 Add Authentication Method
Follow the steps below to create an authentication method object.
Click Wireless Controller Management > Profile > Wireless Profile > Auth. Method.
1
Click Add.
2
Specify a descriptive name for identification purposes in the Name field. You may use 1-30
3
alphanumeric characters, underscores(_), or dashes (-), but the first character cannot be a number.
This value is case-sensitive. For example, "My_Device".
Click Add to insert an authentication method in the table.
4
Select a server object from the Method List drop-down list box.
5
You can add up to four server objects to the table. The ordering of the Method List column is
6
important. The NXC5200 authenticates the users using the databases (in the local user database or
the external authentication server) in the order they appear in this screen.
If two accounts with the same username exist on two authentication servers you specify, the
NXC5200 does not continue the search on the second authentication server when you enter the
username and password that doesn't match the one on the first authentication server.
Click OK to save the settings or click Cancel to discard all changes and return to the previous
screen.
8.7.17 VLAN
A Virtual Local Area Network (VLAN) divides a physical network into multiple logical networks. The
standard is defined in IEEE 802.1q.
Note: By default, the NXC5200 acts a bridge device. This means all interfaces (ge1~g8)
are grouped together into a single VID, vlan0. Note that vlan0 cannot be removed
and the VID cannot be changed.
Figure 240 Example: Before VLAN
In this example, there are two physical networks and three departments A, B, and C. The physical
networks are connected to hubs, and the hubs are connected to the router.
ENC User's Guide
A
C
Chapter 8 Application
B
293
Advertisement
Table of Contents
