Ip Surveillance Port Group Configuration - ZyXEL Communications ENC User Manual

Table 129 IP Surveillance > Configuration > Device Configuration: Edit Port (continued)
LABEL
Deactive
Copy
Port
Status
Enable Polling
IP Camera Type
Power Status
Power Profile
Power
Management
Profile
Traffic Guarantee
Profile

8.6.13 IP Surveillance Port Group Configuration

You can assign traffic and power profiles to groups. To access this screen, click IP Surveillance >
Configuration > Port Group Configuration. Select a group and click Edit Group to access the
following screen.
Figure 208 IP Surveillance > Configuration > Port Group Configuration: Edit Group
The following table describes the labels in this screen.
Table 130 IP Surveillance > Configuration > Port Group Configuration: Edit Group
LABEL
Copy
Group
Traffic Profile
Power Profile
Power
Management
Profile
Traffic Guarantee
Profile
ENC User's Guide
DESCRIPTION
Select ports and click this to deactivate them.
Select a port and click this to copy its configuration to other devices or groups.
This field displays the port number.
This field displays the device status for this port.
Specify if polling is enabled on this port.
Specify the IP camera device type on this port. Select the HD or SD traffic profile.
Specify if power is supplied to this port.
Specify the power profile used on this port.
Specify the power management profile used on this port.
Specify the traffic profile used on this port.
DESCRIPTION
Select a group and click this to copy its configuration to other devices or groups.
This field displays the group name.
Specify the IP camera device type on this port. Select the HD or SD traffic profile.
Specify the power profile used on this port.
Specify the power management profile used on this port.
Specify the traffic profile used on this port.
Chapter 8 Application
253