Chapter 8 Application
The following table describes the labels in this screen.
Table 118 Edit a Widget
LABEL
Top N
Device
Period
Cancel
OK
8.6.3 IP Surveillance Port Group
You can configure port groups that include ports on the devices discovered by the ENC. You can
create a port group and apply profile settings to a group of ports instead of configuring one port at
a time. To access this screen, click Application > IP Surveillance > Port Group. To create a port
group click the Add button, or to edit an existing one select a port group from the list and click the
Edit button.
Figure 192 IP Surveillance > Port Group
The following table describes the labels in this screen.
Table 119 IP Surveillance > Port Group
LABEL
Group Name
Device
242
DESCRIPTION
Select the number of top entries about events or traffic to display in the widget.
Select what type of devices to display or to be used for the widget's statistics. The
available options are All, Access Switch, Aggregate Switch, or NVR Switch.
Select the length of time interval you want to use to look at the statistics.
Click this to discard the changes and close this screen.
Click this to save the changes and close this screen.
DESCRIPTION
Specify the name of the port group. You may use 1-30 alphanumeric characters.
Click the device name in this column to select or deselect all ports on the specific device.
ENC User's Guide