ZyXEL Communications ENC User Manual page 38

Chapter 1 Web Configurator
1.3.5.2 Add User-defined Folder
Use this screen to configure a new folder in the ENC. To open this screen, right-click the Root
Subnet or a network node and select Add User-defined Folder.
Figure 20 Right-click Menus: Add User-defined Folder
The following table describes the labels in this screen.
Table 12 Right-click Menus: Add User-defined Folder
LABEL
Folder Name
Description
Cancel
OK
38
DESCRIPTION
Type up to 32 characters for the folder's name. You can use alphanumeric (0-9, a-z,
A-Z), underscores (_), hyphens (-), and dot (.). Spaces are not allowed.
Type additional information for this folder.
Click this to exit this screen and go back to the previous screen.
Click this to save the changes.
ENC User's Guide