ZyXEL Communications ENC User Manual page 209

Enter the VLAN group's name and ID. Click Ok.
3
The VLAN group is then created.
4
Figure 157 Creating a VLAN Group
To add a device to a VLAN:
Select and hold a device from the Device panel (172.17.17.118 in this example).
1
Drag it to a VLAN group in the VLAN Group panel until you see a plus mark (+) shown in the
2
beginning of the VLAN group name.
Release your mouse.
3
The device is then added to the VLAN group (VLAN_100 in this example).
4
Figure 158 Adding a Device to a VLAN Group
ENC User's Guide
Chapter 8 Application
209