Table of Contents
Advertisement
Chapter 8 Application
Table 122 IP Surveillance > NVR Switch
LABEL
Port Graph
Port
Status
TxPkts
RxPkts
8.6.7 IP Surveillance Map View
The map screen displays icons for switches discovered by the ENC and you can show their
relationships by adding links between them. Click Application > IP Surveillance > Map View to
access this screen.
Figure 200 IP Surveillance > Map View
The following table describes the labels in this screen.
Table 123 IP Surveillance > Map View
LABEL
Add Link
Delete Link
Fit Size
Actual Size
Locate
248
DESCRIPTION
This field displays the status of each port: Alarm, Normal or Off. When you place your
mouse over each port, a status screen appears as shown next.
Figure 199 Port Status
This field displays the port name.
This field displays if the port is enabled or disabled. A yellow light indicates the port is
enabled.
This field displays the number of transmitted frames on this port.
This field displays the number of received frames on this port.
DESCRIPTION
Hold the [Ctrl] key and select two nodes in the Map shown, then click Add Link. See
Section 8.6.7.1 on page 249
Select an existing link and click this to delete the link.
Click this to resize the Map to fit this window.
Click this to display the actual size of the Map.
Click this to quickly find a device that you have selected in the Map if the Map is too big
and you cannot easily find the device.
to add a new link.
ENC User's Guide
Advertisement
Table of Contents
