ZyXEL Communications ENC User Manual page 213

8.3.2.1.1 Additional Port VLAN Settings
Use this screen to configure the selected port's additional VLAN settings. To open this screen, click
Port Setting in the Application > VLAN Management > Edit > Add or Edit screen.
Figure 162 VLAN Management > VLAN Management > Edit > Add/Edit > Port Setting
The following table describes the labels in this screen.
Table 98 VLAN Management > VLAN Management > Edit > Add/Edit > Port Setting
LABEL
Port Number
Port VID
Ingress Check
GVRP
Acceptable
Frame Type
VLAN Trunking
Cancel
OK
ENC User's Guide
DESCRIPTION
This field displays the number of the selected port.
This field displays the VLAN ID assigned to untagged frames that this port receives. Enter
another VLAN ID if you want to change the setting.
Select this to have the device discard incoming frames for VLANs that do not have this
port as a member.
GVRP (GARP VLAN Registration Protocol) is a registration protocol that defines a way for
switches to register necessary VLAN members on ports across the network.
Select this check box to allow GVRP on this port.
Specify the type of frames allowed on the port.
Select All from the drop-down list box to accept all untagged or tagged frames on this
port.
Select Tag Only to accept only tagged frames on this port. All untagged frames will be
dropped.
Enable VLAN Trunking on ports connected to other switches or routers (but not ports
directly connected to end users) to allow frames belonging to unknown VLAN groups to
pass through the device.
Click this to discard all changes and close the screen.
Click this to save the settings and close the screen.
Chapter 8 Application
213