Customized Events; Customize An Event - ZyXEL Communications ENC User Manual

Chapter 5 Event
Table 44 Event Configuration > Default > Edit (continued)
LABEL
Selected Correlate
Events
Cancel
OK

5.2.2 Customized Events

This screen displays a list of customized events. To open the screen, click Events > Configuration
> Customize.
Figure 88 Events > Configuration > Customize
The following table describes the labels in this screen.
Table 45 Events > Configuration > Customize
LABEL
Add
Edit
Remove
check box
Category
Event Name
Severity
Action

5.2.3 Customize an Event

Use this screen to configure an event that has managed devices notify the ENC without being
requested when the event occurs. It does this by sending a message known as a trap.
128
DESCRIPTION
This field displays the event(s) you selected to make a correlation with this event. Select
one or more events (select while pressing [Ctrl]) and press the left arrow button (<) to
remove them from this field. Use the double left arrow button (<<) to remove all events
except the default one from this field.
Click this to discard the changes and close this screen.
Click this to save the changes and close this screen.
DESCRIPTION
Click this to create an event.
Click this to modify a selected event.
Click this to delete the selected event(s).
Select the check box of an entry and click Edit or Remove to take the action for the
entry respectively. Select or clear the check box at the table heading line to select or
clear all check boxes in this column.
This field displays the category to which the event belongs.
This field displays the name of the selected event.
This field displays the severity level of the event.
This field displays the name of the action profile this event applies. The ENC takes the
action when it receives this event.
ENC User's Guide