ZyXEL Communications ENC User Manual page 129

To open this screen, click Add or Edit in the Events > Configuration > Customize screen. A
customized event must belong to the SNMP traps category.
Figure 89 Events > Configuration > Customize > Add/Edit
The following table describes the labels in this screen.
Table 46 Events > Configuration > Customize > Add/Edit
LABEL
General Settings
Event Name
Category
SNMP Trap Version
ENC User's Guide
DESCRIPTION
Type a descriptive name (up to 32 characters) for this event for identification purposes.
You can use alphanumeric characters (0-9, a-z, A-Z), hyphen (-), and underscore (_).
Spaces are allowed. This field is read-only if you are editing an existing event.
This field displays the category to which the event belongs.
Select the version of the SNMP trap messages. Select SNMP version 1 (v1) or both
SNMP version 2c and version 3 (v2c/v3). SNMP v2c and v3 traps use different format
comparing to SNMP v1.
Note: SNMP version 2c is backward compatible with SNMP version 1.
Chapter 5 Event
129