Ip Surveillance Port Power - ZyXEL Communications ENC User Manual

Chapter 8 Application
profile click the Add button, or to edit an existing one select a profile from the list and click the Edit
button.
Figure 202 IP Surveillance > Profile > Traffic Profile: Add
The following table describes the labels in this screen.
Table 125 IP Surveillance > Profile > Traffic Profile: Add
LABEL
Name
Normal Traffic
(kbps)
Lower (%)
Greater (%)

8.6.9 IP Surveillance Port Power

You can configure port power profiles with different allowable power ranges. To access this screen,
click Application > IP Surveillance > Profile > Port Power Profile. To create a new port power
profile click the Add button, or to edit an existing one select a profile from the list and click the Edit
button.
Figure 203 IP Surveillance > Profile > Port Power Profile: Add
The following table describes the labels in this screen.
Table 126 IP Surveillance > Profile > Port Power Profile: Add
LABEL
Name
Normal Power
(kbps)
Lower (%)
Greater (%)
250
DESCRIPTION
Specify the name of the profile. You may use 1-30 alphanumeric characters.
Specify the normal traffic rate.
Specify the lower limit of traffic as a percentage below the normal traffic rate.
Specify the upper limit of traffic as a percentage above the normal traffic rate.
DESCRIPTION
Specify the name of the profile. You may use 1-30 alphanumeric characters.
Specify the normal power usage. This is the power usage of the device connected to the
port, operating under normal usage conditions.
Specify the lower limit of power usage as a percentage below the normal power.
Specify the upper limit of power usage as a percentage above the normal power.
ENC User's Guide