ZyXEL Communications ENC User Manual page 164

Chapter 6 Tool
Note: The available fields in this screen vary depending on the monitor library option you
selected.
Figure 117 Tool > Performance Monitoring > Monitor Manager > Add
The following table describes the labels in this screen.
Table 68 Tool > Performance Monitoring > Monitor Manager
LABEL
General Settings
Status
Monitor Name
Monitor Library
Stored Days
Polling Interval
Description
Available
Instance
Selected
Instance
Threshold
Add
Edit
Remove
check box
164
DESCRIPTION
Select whether to Activate or Inactivate this performance monitor.
Type up to 32 alphanumeric characters (0-9, a-z, A-Z) for the monitor's name. Underscores
(_) and hyphens (-) are also allowed.
Select a performance monitor template to apply to this monitor.
Select the number of days the ENC will store the monitor data before the ENC deletes it.
Select the number of minutes the ENC sends a poll message for the performance monitor.
Enter additional information for the performance monitor in this field.
Select the item(s) you want to monitor and use the > arrow to move them to the Selected
Instance list. You can use the >> arrow to move all the available items to the Selected
Instance list.
This section lists the items to monitor for this performance monitor. Select item(s) and click
the < arrow to remove them from this list. You can use the << arrow to remove all the
items from this list.
Click this to create a new threshold rule.
Select a threshold rule and click this to configure it.
Click this to delete the selected threshold rule(s).
Select this check box and click Edit or Remove to take the action respectively. Select or
clear the check box at the table heading line to select or clear all check boxes in this
column.
ENC User's Guide