Mounting Options; 19" Systems Mounting - Static Rail-Kit For Sn2700; Table 7: Installation Kit - Mellanox Technologies SN2700 Hardware User Manual

Rev 1.2
2.4

Mounting Options

By default, the SN2700 system is sold with the Static Rail-kit described in
SN2410 system is sold with the Static Rail-kit described in
Rail-kit installation instructions, (can be used with SN2700 only) see
2.4.1

19" Systems Mounting - Static Rail-Kit for SN2700

The following parts are included in the Static Rail kit (see Figure 6):
Table 7 - Installation Kit
Kit OPN
MTEF-KIT-A
• 2x Rack mount rails (A)
• 2x Rack mount brackets (B)
• 2x Rack mount blades (C)
• 8x M6 Standard cage nuts¹ ² and 8x M6 Standard pan-head Phillips screws¹ (D)
• 4x Phillips100 DEG F.H TYPE-I ST.ST 6-32 X 1/4 screw with around patch (E)
¹ Other threads are available by special order: M5, 10-32, 12-24
² G-type cage-nut is available by special order.
18 Mellanox Technologies
If anything is damaged or missing, contact your sales representative at support@mella-
nox.com.
At least two people are required to safely mount the system in the rack.
Section
Rack Size and Rack Depth Range
Short (17"-24") or Standard (24"-34")
Section 2.4.1. The
2.4.3. For the Telescopic
Section 2.4.2.
Installation