InfiniBand Switch Platform Hardware User Manual
Revision History
Table 1 - Revision History of this User's Manual
Revision
1.4
Feb. 2014
1.3
Oct. 2010
1.2
Sept. 2010
1.1
Aug. 2012
1.0
July 2010
About this Manual
This manual provides installation and set-up instructions for the SX6512 QSFP Chassis
InfiniBand Switch Platform.
Intended Audience
This manual is intended for users and system administrators responsible for installing
and setting up the chassis platform.
The manual assumes familiarity with the InfiniBand
Mellanox Technologies
Date
Rearranged document: Consolidated installation sections under
Chapter 1, "Installation," on page
on page
12; and re-ordered sections).
Added:
•
Figure 51, "Management Module LEDs," on page 60
Updated:
•
Section 1.4, "Power Supply Redundancy," on page 15
•
Section 1.7.1.5, "Installing the Shelf," on page 22
•
Section 1.7.2, "Installing the Cable Holder," on page 26
•
FDR note in
Section 1.9, "InfiniBand QSFP Cable Installation," on
page 35
•
Section 1.10, "Hot Swap Insertion and Extraction," on page 36
•
Section 7.1, "Disassembling the Chassis," on page 79
•
Appendix A, "Installation Safety Warnings," on page 81
•
Added warning not to use fan handles to lift or move the chassis.
•
Added Figure 10.
•
Added instructions to insert spines from the bottom up.
Leafs, spines, Management modules shipped separately.requiring
Changes to installation procedure
First release
Details
11; updated
Chapter 1, "Overview,"
®
architecture specification.
8