Table of Contents
Advertisement
InfiniBand Switch Platform Hardware User Manual
Revision History
Table 1 - Revision History of this User's Manual
Revision
1.6
Feb. 2014
1.5
July 2011
1.4
Nov. 2010
1.3
Oct. 2010
1.2
Oct. 2010
1.1
Aug. 2010
1.0.1
July 2010
1.0
July 2010
About this Manual
This manual provides installation and set-up instructions for the IS5300 GT series QSFP
Chassis InfiniBand Switch Platform.
Intended Audience
This manual is intended for users and system administrators responsible for installing
and setting up the chassis platform.
The manual assumes familiarity with the InfiniBand
Mellanox Technologies
Date
Rearranged document: Consolidated installation sections under
Chapter 1, "Installation," on page
on page
12; and re-ordered sections).
Added:
•
Figure 59, "Management Module LEDs," on page 64
Updated:
•
Section 1.4, "Power Supply Redundancy," on page 15
•
Section 1.6.3.5, "Installing the Shelf," on page 23
•
Section 1.6.4, "Installing the Cable Holder," on page 37
•
Section 1.9, "Hot Swap Insertion and Extraction," on page 42
•
Section 7.1, "Disassembling the Chassis," on page 85
•
Appendix A, "Installation Safety Warnings," on page 87
Changes to Resetting the Switch section
•
Changes to parts list
•
Minor changes to installation procedure
Added air flow direction
Added step screw in bolts from offset to upper bracket.
•
Added weight lifting warning
•
Added "Remove all protective plastic film from all sides and top of the
chassis."
•
Added cable power classes
Added last page with barcode
First release
Details
10; updated
Chapter 1, "Overview,"
®
architecture specification.
8
Advertisement
Table of Contents
