Portflagsshow - Brocade Communications Systems Brocade 8/12c Command Reference Manual

Brocade fabric os command reference manual supporting fabric os v7.0.0 (april 2011)

Hide thumbs Also See for Brocade 8/12c:

Table of Contents

portFlagsShow

Displays the port status bitmaps for all ports in a switch.

portflagsshow

Use this command to display the following status for a port:

The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in

place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for

To display the port status for all ports in the switch:

Displays whether the port is online or offline.

Displays the port physical status. Valid values are In_Sync, No_Light (Condor 2

ports only), and No_SigDet (quad small form-factor pluggables (QSFPs) installed

without cables). Refer to switchShow help for more information on these states.

Displays whether there is an SFP inserted in the port, whether the port is active,

and the port type.

switch:user> portflagsshow

-------------------------------

U_PORT LOGICAL_ONLINE LOGIN NOELP ACCEPT FLOGI

U_PORT SEGMENTED CBL_LB LOGIN LED

U_PORT LOGICAL_ONLINE LOGIN NOELP ACCEPT FLOGI

U_PORT LOGICAL_ONLINE LOGIN NOELP ACCEPT FLOGI

U_PORT LOGICAL_ONLINE LOGIN NOELP ACCEPT FLOGI

PRESENT ACTIVE F_PORT G_PORT \

PRESENT ACTIVE E_PORT G_PORT \

PRESENT U_PORT LED

PRESENT ACTIVE F_PORT G_PORT \

PRESENT U_PORT LED

PRESENT ACTIVE F_PORT G_PORT \

PRESENT U_PORT LED

Fabric OS Command Reference

53-1001764-01

Table of Contents

Fabric os v7.0.0